Measure the fixed points
Measure from the room corners to the doorway, window and existing fixture connections. Use those measurements when trying a new fixture position.
Bathroom Planner
Lay out a shower and laundry gallery or a bathroom with a tub. Size the fixtures, trace the entry door swing and compare the floor space left between the vanity, toilet and shower.
8.19 m² · 2.6 × 3.15 m
Shower and laundry gallery
Drag a piece within its room, or focus it and press an arrow key for a 10 cm adjustment.
Space between the fixtures
Move the vanity or rotate the toilet to see which gap changes. The readings measure the closest footprint edges, including diagonal gaps. A zero reading means the fixtures touch or overlap.
- Vanity to toilet
- 1.34 m
- Shower to toilet
- 0.43 m
- Shower to vanity
- 0.10 m
Follow the door before placing storage
The entry in this starter is 0.81 m wide. Find its arc on the lower wall and trace the route to the basin. Try a deeper vanity and check both the open door and the space needed to pull a drawer toward you. In Studio, select the door to change its position or hinge.
Fit the fixtures around the entry
Place the largest fixture
Start with the tub or shower. Set its outside dimensions before fitting the vanity and toilet around it.
Check how each fixture is used
Approach the basin from the entry. Picture a person standing there and check where a vanity drawer or shower door will open.
Fixture sizes in this bathroom
The schedule shows the current width and depth of each component. Select a piece above to enter its measured size. Turning it changes the direction it occupies on the plan.
Start with your own room dimensions| Component | Width | Depth |
|---|---|---|
| Shower | 1.44 m | 1.00 m |
| Toilet | 0.42 m | 0.72 m |
| Bathroom vanity | 1.10 m | 0.52 m |
| Washing machine | 0.60 m | 0.62 m |
| Storage cabinet | 0.76 m | 0.39 m |
See the bathroom in context
View the shower and laundry gallery template
Bathroom Planner FAQ
Can I try both a shower-only layout and a bathroom with a tub?
Shower and laundry gallery puts a washer beside the vanity, facing a shallow linen cupboard. Bath and shower room includes a tub, separate shower and double vanity. Switch starters to compare the fixture arrangements; the edits to each layout stay available during this visit.
Can I enter the dimensions of my own vanity or bathtub?
Select the fixture on the drawing or in the list. Enter its outside width and depth in metres, then choose Apply size. You can rotate it in quarter turns and move it within the room. Measure projecting rims or handles when comparing with the actual fixture.
Does the door clear the toilet?
Look at the door arc on the 2D drawing and follow it from the hinge to the open position. The fixture gaps below measure pairs of fixtures. Check the door arc separately, and use Studio to change the doorway or hinge if needed.
Do these distances certify installation clearances?
They describe the footprints in your drawing. A drawer, a shower door and the space used by a person can all extend into that gap. Check the product’s installation dimensions and applicable requirements for your site.
Can I keep this bathroom inside a larger home plan?
Open this bathroom in Studio to create an editable project with its fixtures and openings. You can draw adjoining rooms or add another floor. Opening from 3D keeps the viewing direction you selected.